Looking at Addison Airport with an aviation perspective, compared to the parallel 100-foot-wide Runway 15/33, Taxiway Alpha is a narrow strip of pavement, so improving it shouldn’t take much time, right? Now that the project is complete, Mitchell McAnally, an engineer with Garver USA who was the project’s manager, put the effort in its proper contest by sharing the numbers in equivalent terms.
The project reconstructed 54,000 square yards of Taxiway Alpha. Put another away, that would build 1.25 miles of full-width Belt Line Road, from Midway to the Town of Addison City Hall. It consumed 30,500 tons of asphalt, and if it were delivered at one time, the line of trucks, bumper to bumper, would stretch from the airport to the American Airlines Center in downtown Dallas.
Concrete aircraft holding bays were constructed at both ends of Taxiway Alpha. The north bay is 35-percent larger than its predecessor, and the south bay now gives aircraft an area to perform their run-up checks without blocking the Taxiway Alpha traffic flow. In five days last August, the project rebuilt 800 feet of Taxiway Tango and continued the asphalt overlay over its remaining length.
Crews stretched 84,140 linear feet—15.93 miles—of cable and conduit along Taxiway Alpha to power and control the 376 LED taxiway edge lights that replaced 288 incandescent lights. While the number of individual lights increased nearly 25 percent, the overall power needed to make them glow dropped by 40 percent compared to the previous incandescent needs. That doesn’t include the power going to the 58 new LED taxiway position and guidance signs, which are larger than the 52 incandescent signs they replaced.